Most ordered Donor & dedication plaques
An honour board that stays on the wall for twenty years. Engraved brass on a wooden back, or acrylic with a separate layer per donor.
Brass · Wood · Acrylic Customize this product
From one piece to full production runs
Your idea, engraved in light
22 years of laser engraving, UV printing, sublimation and precision cutting. Upload artwork, place it on the product, get it right the first time.
Design it online, see it exactly before you order, and buy it here.
- years of work
- 22 years of work
- piece minimum
- 1 piece minimum
- production methods
- 6 production methods
Move your cursor — the light engraves
Who we produce for
- Synagogues
- Schools & kindergartens
- Nonprofits & charities
- Companies & businesses
- Community boards & councils
- Yeshivas & Torah institutions
How it works
Four steps, without a chain of emails
Every order used to start with a phone call. Now you can see exactly what you will get — and only then order.
- 01
Choose a product
A dedication plaque, an award, signage or a tzedakah box. Each one carries its material, dimensions and engraving area.
- 02
Design it online
Upload a logo or type the wording, place it on the product and see a faithful preview. You are warned up front if the resolution is too low or the text runs outside the safe area.
- 03
Approve and pay
The full price is shown before payment. Approve the preview, pay on the site and get your order confirmation.
- 04
We produce and ship
The file goes to production in the studio. When it is done we ship it, or hold it for collection.
What people order
The work we do most
Each of these categories has its own rules — minimum letter height, margins, a material that survives outdoors. They are already built into the editor.
-
-
Memorial plaques
Exact wording, correct spacing and a letterform that reads from across the room. We proof the text before production.
Brass · Stone · Acrylic Customize this product -
Awards & certificates
Glass or acrylic with internal engraving on a stable base. Built for an evening with dozens of recipients.
Glass · Acrylic Customize this product -
Synagogue & institutional signage
Room names, wayfinding, schedules and permanent signs. A whole set on one design line.
Acrylic · Vinyl · Metal Customize this product -
Tzedakah boxes
A laser-cut box with the institution name engraved. From a single piece to a set for every classroom.
Wood · Acrylic Customize this product -
Corporate & donor gifts
A branded gift you are not embarrassed to hand over — engraved logo, proper packaging, exact quantity.
Wood · Metal · Glass Customize this product
Before and after
The same board, once the light has passed over it
Drag the handle to see the difference. The engraving goes into the wood — it is not a layer sitting on top of it.
Production methods
Six methods, all of them in our own studio
Nothing goes out to a subcontractor. We pick the method for the material and the result it has to reach — not for whatever machine happens to be free.
-
01
Laser engraving
The lettering is burned into the material itself. It will not rub off, fade or peel — the right answer for dedication and memorial plaques.
- Wood
- Brass
- Glass
- Leather
-
02
Laser cutting
Cut lines accurate to tenths of a millimetre, including interior shapes and cut-out letters. A clean edge with no finishing pass.
- Acrylic
- Plywood
- Felt
-
03
UV printing
Full colour straight onto a rigid surface, including white ink and raised texture. For a multi-colour logo that has to come out exact.
- Acrylic
- Metal
- Wood
-
04
Sublimation
The colour sinks into the coating rather than sitting on top of it. A full image that survives washing and rubbing, mostly on mugs and ceramics.
- Ceramic
- Aluminium
-
05
CNC cutting
Computer-controlled milling for dimensional work and thick stock: three-dimensional letters, relief panels and exterior signage.
- Solid wood
- Thick acrylic
-
06
Vinyl cutting
Graphics cut and applied to glass, a wall or a door. The clean answer for wayfinding and room names.
- Glass
- Wall
- Storefront
- 22 years
- in engraving and signage
- 6 methods
- under one roof
- 9 materials
- wood, acrylic, glass, metal and more
- 1 piece
- minimum order quantity
Since 2004 — same studio, same standards
Engraving, cutting, UV, sublimation, CNC, vinyl
Every material behaves differently. We know how
A single item or a full run, same attention
Customers
What people say
Our orders come back. That is the number we count.
-
We ordered a donor board for the synagogue after two failed attempts elsewhere. Here they sat with us over the wording, proofed the names, and the board has hung for four years without a mark.
Synagogue board Community in Gush Dan Sample quote — to be replaced with a real testimonial -
Eighty awards for a volunteers evening, each with a different name. Everything arrived correct, on time, and without a single spelling error.
Donor relations manager National nonprofit Sample quote — to be replaced with a real testimonial -
Signage for the whole school — class names, wayfinding and a founders board. One design line, and when we added a class the following year it matched straight away.
School principal Primary school Sample quote — to be replaced with a real testimonial
FAQ
What people ask before a first order
PNG, JPG, SVG or PDF. For engraving a vector file (SVG or PDF) is better — it cuts at full accuracy at any size. If all you have is an image, the editor checks the resolution live and warns you before you order if it is too low for the size you picked.
Send us whatever you have on WhatsApp or by email. In most cases we can rebuild the logo as a clean vector file, and from then on it serves you for every future order.
Yes. Laser engraving burns the lettering into the material, so it cannot peel or rub off. UV printing and sublimation give a durable layer, but for exterior signage or a board people touch often we will steer you to engraving.
Yes. There is no minimum quantity. A single piece gets the same file check and the same proofing as a run of a hundred.
The production time is shown on each product page, because it changes with the method and the material. If you have a date to hit — an awards evening, a building dedication, the start of the school year — write to us before ordering and we will tell you up front whether it is realistic.
The wording you see in the preview before payment is the wording that gets engraved, so it is worth reading twice. On memorial and dedication work we also proof the names ourselves and come back to you if something looks wrong.
Yes. For bulk orders you can order a single unit first, hold it in your hand, and only then order the rest.
Courier to your door, Israel Post, or collection from the studio. You choose at checkout.
Start with the design. We handle the rest.
Pick a product, upload a logo or the wording, and see exactly how it comes out before you order.
From one piece · 6 production methods · 22 years in the trade